Leica iCON gps 160
- W C.4
- N C.3
- G C.2
- Appendix C: Glossary C.1
- ORP – Orientation and Position Appendix B
- ZDA - Time and Date A.21
- XDR – Transducer Measurements A.20
- VTG - Course Over Ground and Ground Speed A.19
- SVP - Satellite Position (Elevation, Azimuth) A.18
- RTD - Real-Time Data Status A.17
- RMC - Recommended Minimum Specific GNSS Data A.16
- PJK - Local Coordinate Position Output A.15
- LLQ - Leica Local Position and Quality A.14
- LLK - Leica Local Position and GDOP A.13
- INF - System Information A.12
- HDT - Heading, True A.11
- GST - Position Error Statistics A.10
- GSV - GNSS Satellites in View A.9
- GSA - GNSS DOP and Active Satellites A.8
- GNS - GNSS Fix Data A.7
- GLL - Geographic Position Latitude/Longitude A.6
- GGQ - Real-Time Position with CQ A.5
- GGK - Real-Time Position with DOP A.4
- GGA - Global Positioning System Fix Data A.3
- Symbols Used for Describing the NMEA Formats A.2
- Appendix A NMEA Message Formats: A.1 Overview
- Personal Data Statement 12
- Software Licence Agreement/Warranty 11
- Dangerous Goods Regulations 10.6
- CGA100 10.5.2
- Conformity Declarations: iCON gps 160 10.5.1
- Network 10.4
- Pin Assignments and Sockets 10.3
- Antennas Technical Data 10.2
- General Technical Data of the Product 10.1.3
- Accuracy 10.1.2
- Technical Data: Tracking Characteristics 10.1.1
- Cleaning and Drying 9.3
- Storage 9.2
- Care and Transport: Transport 9.1
- Coordinate Systems 8
- Configuration of the gps 160 SmartAntenna using the Web Interface 7
- Licensing 6.7
- Import, Export, or Delete Data 6.6
- Leica ConX 6.5
- Raw Data Logging 6.4
- ORP and NMEA Output 6.3
- Rover Setup 6.2
- Base Coordinates 6.1.4
- Base Setup using BasePilot 6.1.3
- Manual Base Setup 6.1.2
- Available Sub Menus 5.3.3
- How to Change Settings and Edit Values 5.3.2
- Submenus: Navigation in Submenus 5.3.1
- Main Menu 5.2
- iCON gps 160 SmartAntenna User Interface: User Interface Description 5.1
- Establish Bluetooth Data Connection 4.8
- Setup for Vehicle Use 4.7
- Setup for Machine Use 4.6
- Real-Time Rover Setup 4.5
- Real-Time Base with Raw Data Logging 4.3
- Local Base Station Setup with External GNSS Antenna 4.2
- Real-Time Base Setup 4.1
- Setups with Accessories 4
- Measuring the Antenna Height for a Tripod Setup 3.6.4
- The Antenna Reference Plane, ARP 3.6.2
- Antenna Heights: Understanding Antenna Heights 3.6.1
- Installation on a Machine 3.5
- Using USB Memory Devices 3.4
- Installing a SIM Card 3.3
- General Battery Handling 3.2.2
- Batteries: Installing the Internal Battery 3.2.1
- Using the iCON gps 160 SmartAntenna: Power Supply 3.1
- iCON Series Field Software Overview 2.4.3
- Holder and Clamps for Field Controllers 2.4.2
- Compatible Field Controllers: Available Field Controller 2.4.1
- Instrument Components 2.3
- Rover Setup Container 2.2.2
- Base Station Container 2.2.1
- Unpacking the Container 2.2
- Description of the System: System Components 2.1
- Electromagnetic Compatibility (EMC) 1.6
- Hazards of Use 1.5
- Responsibilities 1.4
- Limits of Use 1.3
- Definition of Use 1.2
- Safety Directions: General Introduction 1.1
- Table of Contents: Leica iCON gps 160
- Introduction: Leica iCON gps 160
- Measuring the Antenna Height for a Pillar Setup 3.6.3
- Measuring the Antenna Height for a Pole Setup 3.6.5
- Software Tools: Base Setup Description 6.1.1