Leica MC1 Excavator
- List of content: Leica MC1 Excavator
- Workflow 2.1. Change units (2D/3D)
- 3. Run-screen indicators
- Workflow 3.1. Activate tilt indicator (2D/3D)
- Workflow 2.3. Use the MC1 on-screen help (2D/3D)
- Workflow 3.2. Change indicators at top of run-screen (2D/3D)
- Workflow 4.2. Re-calibrate a bucket (2D/3D)
- Workflow 4.7. Change side tool point (2D/3D)
- Workflow 4.8. Set direction of X (2D)
- Workflow 4.9. Bench bucket height (2D)
- Workflow 4.10. Offset benched bucket height (2D)
- 5. Laser
- Workflow 5.1. Set up your laser (2D)
- Workflow 5.2. Bench laser height (2D)
- Workflow 5.4. Align slope values of laser and bucket (2D)
- 6. Tolerances
- Workflow 6.1. Change tolerance colours (2D/3D)
- Workflow 6.3. Change tolerance "beep volume" (2D/3D)
- Introduction: Leica MC1 Excavator
- Solution: Leica MC1 Excavator
- Workflow 1.1. Find out what solution you have (2D or 3D?)
- 2. System: Leica MC1 Excavator
- Workflow 2.2. Switch from 3D to 2D mode (2D/3D)
- Workflow 4.3. Verify a bucket calibration (2D/3D)
- Workflow 4.4. Change bucket (2D/3D)
- Workflow 4.5. Change height tool point (2D/3D)
- Workflow 7.1. Engage CoPilot auto tilt (2D/3D)
- Workflow 4.1. Create a new bucket (2D/3D)
- Workflow 4.6. Select "closest to" tool point (2D/3D)
- Workflow 4.11. Set bucket slope values (2D)
- Workflow 5.3. Offset benched laser height (2D)
- Workflow 4.12. Use moving point (load/store), (2D)
- Workflow 6.2. Change tolerances (2D/3D)
- 7. Auto mode
- Workflow 7.3. Engage semi-automatic machine control (2D/3D)
- Workflow 8.1. Synchronize files (3D)
- Workflow 8.3. Select and use references from run-screen (3D)
- Workflow 8.4. Create a baseline model (3D)
- Workflow 9.2. Select and use a side reference (3D)
- Workflow 10.1. Create point logs (3D)
- Workflow 11.1. Set up your TPS (3D)
- Workflow 11.2. Confirm your machine control license (Captivate), (3D)
- Workflow 11.4. Prepare your TPS for connection to MC1 (3D)
- Workflow 11.6. Work with a single TPS (3D)
- Workflow 11.8. Use prism search to re-connect a TPS (3D)
- Workflow 11.9. Perform daily machine check-in (TPS), (3D)
- Workflow 11.10. View machine position (Captivate), (3D)
- Workflow 11.11. View machine position (iCON Site), (3D)
- Workflow 12.1. Select GNSS positioning profile (3D)
- Workflow 12.3. Perform "GNSS elevation of known point" (3D)
- Workflow 7.2. Engage CoPilot auto rotator (2D/3D)
- 8. Projects and models
- Workflow 8.2. Find your project and models (3D)
- Workflow 8.5. Create a dual slope model (3D)
- 9. References
- Workflow 9.1. Select and use a height reference (3D)
- Workflow 9.3. Offset a model reference (3D)
- Workflow 9.4. Offset individual references (3D)
- 10. As-built
- 11. TPS Leica MC1 Excavator
- Workflow 11.3. Confirm your machine control license (iCON Site), (3D)
- Workflow 11.7. Work with dual TPS (3D)
- 12. GNSS Leica MC1 Excavator
- Workflow 12.2. Perform daily machine check-in (GNSS), (3D)
- 4. Bucket