Leica iCON gps 100
- Appendix C: C3
- Appendix C: C.2
- Appendix C: Glossary C.1
- Appendix B: ORP – Orientation and Position
- ZDA - Time and Date A.21
- XDR – Transducer Measurements A.20
- VTG - Course Over Ground and Ground Speed A.19
- SVP - Satellite Position (Elevation, Azimuth) A.18
- RTD - Real-Time Data Status A.17
- RMC - Recommended Minimum Specific GNSS Data A.16
- PJK - Local Coordinate Position Output A.15
- LLQ - Leica Local Position and Quality A.14
- LLK - Leica Local Position and GDOP A.13
- INF - System Information A.12
- HDT - Heading, True A.11
- GST - Position Error Statistics A.10
- GSV - GNSS Satellites in View A.9
- GSA - GNSS DOP and Active Satellites A.8
- GNS - GNSS Fix Data A.7
- GLL - Geographic Position Latitude/Longitude A.6
- GGQ - Real-Time Position with CQ A.5
- GGK - Real-Time Position with DOP A.4
- GGA - Global Positioning System Fix Data A.3
- Symbols Used for Describing the NMEA Formats A.2
- Appendix A NMEA Message Formats: Overview A.1
- Personal Data Statement 9
- CGA100 7.5.2
- Conformity Declarations: iCON gps 100 7.5.1
- Network 7.4
- Pin Assignments and Sockets 7.3
- Antennas Technical Data 7.2
- General Technical Data of the Product 7.1.3
- Accuracy 7.1.2
- Technical Data: Tracking Characteristics 7.1.1
- Cleaning and Drying 6.3
- Storage 6.2
- Care and Transport: Transport 6.1
- iCON gps 100 Web Interface 5
- Setups with Accessories 4
- Dual GNSS Positioning and Heading 3.5
- Measuring the Antenna Height for a Mast Setup 3.4.3
- The Antenna Reference Plane, ARP 3.4.2
- Antenna Heights: Understanding Antenna Heights 3.4.1
- Installation on a Machine 3.3
- Using USB Memory Devices 3.2
- Using iCON gps 100: Power Supply
- Instrument Components 2.3
- iCON gps 100 Dual GNSS Container 2.2.1
- Power Concept 2.1.2
- Description of the System: System Components 2.1
- Table of Contents: Leica iCON gps 100
- Introduction: Leica iCON gps 100
- Software Licence Agreement/Warranty