Leica iCON Construction Layout Tool iCT30
- Automatic Target Aiming (ATR) 1.6.5
- Laser Plummet 1.6.8
- Electromagnetic Compatibility (EMC) 1.7
- FCC Statement, Applicable in U.S. 1.8
- Description of the System: System Components 2.1
- Power Concept 2.2.2
- Container Contents 2.3
- Instrument Components 2.4
- Introduction: Leica iCON Construction Layout Tool iCT30
- Table of Contents: Leica iCON iCT30
- Safety Directions: General Introduction 1.1
- Definition of Use 1.2
- Limits of Use 1.3
- Responsibilities 1.4
- Hazards of Use1.5
- Laser Classification: General 1.6.1
- Distancer, Measurements with Reflectors 1.6.2
- Distancer, Measurements without Reflectors 1.6.3
- Red Laser Pointer 1.6.4
- AutoSearch 1.6.6
- Electronic Guide Light (EGL) 1.6.7
- System Concept: Software Concept 2.2.1
- Data Storage Concept 2.2.3
- User Interface: Keyboard 3.1
- Operation: Instrument Setup 4.1
- Battery for the iCT Instrument 4.4.2
- Working with the Memory Device 4.6
- CommunicationHandle 3.2
- Remote Control Setup 4.2
- Holder and Clamp for Field Controller 4.3
- Batteries: Operating Principles 4.4.1
- Power Functions 4.5
- Connecting to a Personal Computer 4.7
- Guidelines for Correct Results 4.8
- Check & Adjust: Overview 5.1
- Adjusting the Circular Level of the Instrument and Tribrach 5.4
- Adjusting the Circular Level of the Prism Pole 5.5
- Inspecting the Laser Plummet of the Instrument 5.6
- Storage 6.2
- Cleaning and Drying 6.3
- Maintenance 6.4
- Distance Measurement with Reflectors 7.2
- Preparation 5.2
- Combined Adjustment (l, t, i, c and ATR) 5.3
- Servicing the Tripod 5.7
- Care and Transport: Transport 6.1
- Technical Data: Angle Measurement 7.1
- Automatic Target Aiming (ATR) 7.4
- AutoSearch 7.5
- Conformity to National Regulations: iCT30 7.7.1
- LOC8 Theft Deterrence and Location Device (optional) 7.7.3
- General Technical Data of the Product 7.8
- Distance Measurement without Reflectors 7.3
- Dangerous Goods Regulations 7.7.4
- LOC8 Theft Deterrence and Location Device (optional) 7.6
- CommunicationHandle 7.7.2
- Reduction Formulas 7.10
- Scale Correction
- Software Licence Agreement 8