The following workflows focus on the bucket:
• Workflow 4.1. Create a new bucket (2D/3D).
• Workflow 4.2. Re-calibrate a bucket (2D/3D).
• Workflow 4.3. Verify a bucket calibration (2D/3D).
• Workflow 4.4. Change bucket (2D/3D).
• Workflow 4.5. Change height tool point (2D/3D).
• Workflow 4.6. Select "closest to" height tool point (2D/3D).
• Workflow 4.7. Change side tool point (2D/3D).
• Workflow 4.8. Set direction of X (2D).
• Workflow 4.9. Bench bucket height (2D).
• Workflow 4.10. Offset benched bucket height (2D).
• Workflow 4.11. Set bucket slope values (2D).
• Workflow 4.12. Use moving point (load/store), (2D).
