Product and accessories
• Blow dust off lenses and prisms.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Do not use other liquids; these may attack
the polymer components.
Fogging of prisms: Prisms that are not at ambient temperature can fog. Before use, let them adjust to the ambient temperature of the work environment and clean as required.
Battery charger: Use only a clean, soft, lint-free cloth for cleaning.
Cables and plugs: Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.
Connectors with dust caps: Wet connectors must be dry before attaching the dust cap.
Cleaning
• Keep the product away from excessive dirt, dust and contaminants
• After unpacking the product visually inspect it for possible damage
• Unplug the product from the outlet before cleaning
Damp products
Dry the product, the transport container, the foam inserts and the accessories at a temperature not greater than 40 °C /104 °F and clean them. Remove the battery cover and dry the battery compartment. Do not re-pack until everything is completely dry. Always close the transport container when using in the field.