Syntax: $--LLQ,hhmmss.ss,mmddyy,eeeeee.eee,M,nnnnnn.nnn,M,x,xx,x.x,x.x,M*hh<CR><LF>
Description of fields
Examples
For NMEA v4.0:
Standard Talker ID = GPS only
$GPLLQ,154324.00,111414,546629.232,M,5250781.577,M,
1,09,3.876,366.549,M*05
Standard Talker ID = GNSS
$GNLLQ,154119.00,111414,546629.181,M,5250782.747,M,
1,20,3.890,367.393,M*1D
$GPLLQ,154119.00,111414,,,,,,09,,,*44
$GLLLQ,154119.00,111414,,,,,,07,,,*56
$GBLLQ,154119.00,111414,,,,,,04,,,*58
For NMEA v4.1:
Standard Talker ID = GPS only
$GPLLQ,154324.00,111414,546629.232,M,5250781.577,M,
1,09,3.876,366.549,M*05
Standard Talker ID = GNSS
$GNLLQ,154149.00,111414,546629.191,M,5250782.727,M,
1,20,3.880,367.387,M*1B
☞ When more than one GNSS is active only $GNLLQ is output.