Skip to content
English
Go to ABTECH.com
  • There are no suggestions because the search field is empty.

Using iCON aps 200: Power Supply 3.1

External power supply only
• 9 V to 36 V DC power supply (machine or vehicle) via a converter cable
supplied by Leica Geosystems.
• The iCON aps 200 instrument is powered via the CAN1 port.

☞ For permanent operations use Uninterruptible Power Supply units as a backup in a main power failure. 

☞ In general, all installation works - including the setting up of a permanent power supply - must be done by a dedicated installation specialist. Please contact the local selling unit or dealer for further information.