This manual contains important safety directions as well as instructions for setting up the product and operating it. Refer to "6 Safety Directions" for further information. Read carefully through the User Manual before you switch on the product.
To ensure safety when using the system, please also observe the directions and instructions contained in the User Manual and Safety Handbook issued by the:
• Machine manufacturer,
• Controller manufacturer and
• Sensor manufacturer.
Product identification
The type and the serial number of your product are indicated on the type plate. Enter the type and serial number in your manual and always refer to this information when you need to contact your agency or Leica Geosystems authorised service workshop.
Type: _______________
Serial No.: _______________
Symbols 
Trademarks
• Windows and Windows CE are a registered trademark of Microsoft Corporation
• CompactFlash and CF are trademarks of SanDisk Corporation
• Bluetooth is a registered trademark of Bluetooth SIG, Inc All other trademarks are the property of their respective owners.
Validity of this manual
This manual applies to all iCON robot 50 Series instruments. Where there are differences between the various models they are clearly described.
Available documentation
Refer to the following resources for all iCON robot 50 documentation and software
• the Leica iCon DVD
• http://myworld.leica-geosystems.com/
It is recommended to set-up the product while reading through this manual.