Description: Data is stored on a memory device. The memory device can be an SD card or internal memory. For data transfer an USB stick can also be used.
Memory device:
➜ While other SD cards can be used, Leica Geosystems recommends to only use Leica SD cards and is not responsible for data loss or any other error that can occur while using a non-Leica card.
Unplugging connecting cables or removing the SD card or USB stick during the measurement can cause loss of data. Only remove the SD card or USB stick or unplug connecting cables when the iCON robot 60/iCON builder 60 instrument is switched off.
Transfer data: Data can be transferred in various ways. Refer to "4.2 Connecting to a Personal
Computer".
SD cards can directly be used in an OMNI drive as supplied by Leica Geosystems. Other PC card drives can require an adaptor.