| Function | Description |
|
Automatic Logging
|
Set Autologging to On/Off. Select the Logging Mode from 3D Distance, Distance and/or Height, Time, or Time over a point and define the Interval. Store on demand allows you to record measurements anywhere in between, if enabled. |
|
Reference
|
Stake out with reference to a line, which is defined by tapping elements on the screen. Line and Offset values are displayed in the Information bar. These values are derived from the North and East values of the line. The height value is derived from the height of the Terrain Model. |
|
Fix Heading
|
A cross section can be defined perpendicular to the current heading based on the walking path. To fix the calculation of cross sections based on the last heading tap Fix Heading. |
|
Start long section
|
optional license Activates a long-section view. A long-section view is similar to a cross-section view but along the current direction of movement. ➜ Surface Pilot licence is needed. |
|
Offset
|
Vertically offset the whole Terrain Model. Cut/Fill values in the Information bar are altered according to the offset applied. |
|
Stake Elevation
|
Stake out with reference to a height, which is • by selecting an existing point, • by entering the height directly, or • or by selecting an area. The reference height is automatically calculated to the balanced height of the area. Cut/Fill values in the Information bar are altered according to the reference height applied. Side View is a kind of cross section view and only available when using Stake Elevation. |
|
Stake Writer
|
Enable this option to get guidance on marking of the stake. For further details refer to: Using Stake Writer step-by-step |
|
Grade Checker
|
Applies minimum and maximum elevation filtering to the map data. Surfaces can be visually checked for, for example, water drains or areas of water accumulation. For detailed information refer to: Using the Grade Checker tool |
|
Grid Preview
|
optional license Displays the full Cut/Fill Grid of the whole surface. ➜ Surface Pilot licence is needed. |
|
Manage Grid Calculations
|
optional license Allows you to view and delete already created Grid Logging calculations. • To view details of a calculated result, tap the arrow button to the right. • To delete a calculated result, tap its name to select it, tap ➜ Surface Pilot licence is needed. |
to accept and confirm the deletion.