Skip to content
English
Go to ABTECH.com
  • There are no suggestions because the search field is empty.

Autodetect Behaviour 3.2

Description

• The instrument incorporates an autodetect behaviour and automatically detects the following devices:
• CommunicationHandle
• radios/modems
• Whenever a device is attached, the instrument responds with two short beeps.
• Whenever a device is removed, the instrument responds with one long beep.

Radio/Modem in clip-on housing

• All radios and modems that are built into a clip-on housing are automatically detected by the instrument when attached to clip-on housing, but the device settings are not automatically set.

CommunicationHandle

• CommunicationHandle is automatically detected by the instrument when it is attached.
• WiFi and long range Bluetooth Handles appear as "C1" or "C2" identification while they are searched for pairing. Example reading: "iCR52 280536 C1"
• CCD1 = WiFi shown as "C1"
• CCD2 = Bluetooth shown as "C2"