Data Storage 4.3

Description: An internal memory is included in all instruments. The iCON build firmware
stores all data in projects and jobs in a database in the internal memory.

Data can be transferred from the internal memory to a computer or other device via:
• a LEMO cable connected to the serial interface RS232 port
• an SD card
• an USB stick inserted into the USB host port,
• an USB cable connected to the USB device port, or
• a Bluetooth connection.
• WLAN
• an LTE antenna (iCB70)

While other SD cards/USB sticks can be used, Leica Geosystems recommends to only use Leica SD cards/USB sticks and is not responsible for data loss or any other error that can occur while
using a non-Leica SD card/USB stick. 

Unplugging connecting cables or removing the SD card or USB stick during the measurement can cause loss of data. Only remove the SD card or USB stick or unplug connecting cables when the iCB instrument is switched off.

SD cards can directly be used in an OMNI drive as supplied by Leica Geosystems. Other PC card drives can require an adaptor.