Labelling DS4000
Frequency bands 
Radio Exposure Statement: In order to comply with RF Exposure requirements, this device must be used/installed to provide at least 20 cm separation from the human body at all times.
The use of Stream T system may be subject to a license and/or an authorization by the Competent Ministry of the country where the system will be used. An individual license and restrictions are in place to date in the following European countries:
CH, LI
https://www.bakom.admin.ch/bakom/en/homepage/frequencies-and-antennas/frequency-use-with-or-without-licences/
radiocommunication-licences-in-general.html
DE https://www.bundesnetzagentur.de/SharedDocs/Downloads/DE/Sachgebiete/Telekommunikation/Unternehmen_Institutionen/Technik/InverkehrbringenvonProdukten/Schnittstellenbeschreibungen/OrtungsfunkOR/SSBOR_NN022.pdf?
__blob=publicationFile&v=4
ES https://www.boe.es/diario_boe/txt.php?id=BOE-A-2011-19146
FR https://www.anfr.fr/en/broadcasting-authorisation/reseauxprofessionnels/les-frequences-utilisees-a-titre-temporaire/lessystemes-dimagerie-radar-de-type-gpr-wpr/
PT https://www.anacom.pt/render.jsp?categoryId=389647
RO https://www.ancom.ro/radio-spectrum_2749
SV https://www.pts.se/sv/bransch/radio/radiotillstand/ansokningshandlingar/
For more details with reference to the restriction, please refer to the following website:
https://efis.cept.org/sitecontent.jsp?sitecontent=srd_regulations
EU
Receiver test according to EN 302 066 v. 2.1.0
The unit has been tested according to the provision of the EN 302 066 v. 2.1.0. Specifically, for the receiver test (that tests the influence of an interferer signal to the device), the following performance criterion has been used
(see ETSI TS 103 361 v.1.1.1) . Performance criterion: The difference D between the Rx
signal noise (increased by an interferer) and the maximum input signal for the Rx
in the linear region of operation. Level of performance: Dmin > 30 dB
UKCA 
USA: FCC ID: UFW-AE4H
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user is required to correct the interference at his own expense.
Changes or modifications not expressly approved by Leica Geosystems for compliance could void the user's authority to operate the equipment.
Operation of this device is restricted to law enforcement, fire and rescue officials, scientific research institutes, commercial mining companies, and construction companies. Operation by any other party is a violation of 47 U.S.C. § 301 and could subject the operator to serious legal penalties.
Coordination Requirements:
(a) UWB imaging systems require coordination through the FCC before the equipment may be used. The operator shall comply with any constraints on equipment usage resulting from this coordination.
(b) The users of UWB imaging devices shall supply detailed operational areas to the FCC Office of Engineering and Technology who shall coordinate this information with the Federal Government through the National Telecommunications and Information Administration. The information provided by the UWB operator shall include the name, address and other pertinent contact information of the user, the desired geographical area of operation, and the FCC ID number and other nomenclature of the UWB device. This material shall be submitted to the following address:
Frequency Coordination Branch., OET
Federal Communications Commission
445 12th Street, SW
Washington, D.C. 20554
ATTN: UWB Coordination
(c) The manufacturers, or their authorized sales agents, must inform purchasers and users of their systems of the requirement to undertake detailed coordination of operational areas with the FCC prior to the equipment being operated.
(d) Users of authorized, coordinated UWB systems may transfer them to other qualified users and to different locations upon coordination of change of ownership or location to the FCC and coordination with existing authorized operations.
(e) The NTIA/FCC coordination report shall include any needed constraints
that apply to day-to-day operations. Such constraints could specify prohibited
areas of operations or areas located near authorized radio stations for which
additional coordination is required before operation of the UWB equipment.
If additional local coordination is required, a local coordination contact will be
provided.